Filename: 2008 Pontiac G8 TRAILING ARMS TCA026 pdf
Language: English
File : PDF
Size: Mb
1 TRAILING ARMS TCA026 – 2008-PRESENT PONTIAC G8, 2010-PRESENT CAMARO Tools required: o 3/8″ drive ratchet o 18mm socket o 18mm wrench Installation: 1. Lift the vehicle until the wheels are off the ground. Support with jack stands. NOTE: Installation is much simpler with wheels/tires removed however it is not necessary to remove them. 2. Start with the outer bolt. Hold the nut with the wrench and loosen the bolt using the socket. 3. Using the socket, remove the front trailing arm bolt. NOTE …
Tools required: o 3/8″ drive ratchet o 18mm socket o 18mm wrench Installation: 1. Lift the vehicle until the wheels are off the ground. Support with jack stands. NOTE: Installation is much simpler with wheels/tires removed however it is not necessary to remove them. 2. Start with the outer bolt. Hold the nut with the wrench and loosen the bolt using the socket. 3. Using the socket, remove the front trailing arm bolt. NOTE: the nut is welded to the subframe and is not necessary to hold with a wrench. 4. Remove both bolts and remove the trailing arm. NOTE: outer bolt can only be removed if the suspension is in the full droop position. 5. Install the BMR trailing arm back into the original position and insert the bolts. 6. Repeat steps 2-5 on the other side. 7. Torque bolts to 80 ft/lbs. 8. Lower vehicle. 9. Grease both fittings approximately 3-4 pumps or until you see the bushing just start to bulge. NOTE: it is recommended to grease the bushings with the vehicle lowered and the suspension compressed. Failure to do so may result in suspension binding and/or…
You can Download 2008 Pontiac G8 TRAILING ARMS TCA026 pdf Below
If the information you are looking for less, you can use the sponsored links to get related information
Get the file Download here | PDF-HOME